2151BPI Detector
This photoelectric point detector is designed for general purpose smoke detection in conventional circuits. It features an on-board signal processor designed to reduce nuisance alarms.
885-WP Detector
This weatherproof heat detector is a conventional rate-of-rise heat detector, plus 60 degree C fixed temperature threshold, designed to provide open area protection in areas subject to moisture.
5151 Series Detector
As 2-wire heat detectors, the System Sensor 5151 Series II range combines rate-of-rise and fixed temperature operations to provide open-area protection. They comply with AS 7240.5-2004.
Pertronic-Anbesec LHD Cable
Heat sensing cable with a pair of twisted wires. The internal separator melts at a specific temperature, allowing contact between the wires
T1000E PROBE
Operates to a fixed temperature, and is suitable for many industrial and dirty sites where a conventional sensor wouldn't work. It's robust design enables operation in high air flow situations.
B401 Detector Base
The B401 plug-in detector base is used with numerous System Sensor smoke and heat detector heads, and is much more versatile than equivalent direct-wired models.
B401R Detector Base
The B401R plug-in detector base is used with a System Sensor model 2451E photoelectric head and 1451E ionization head, and also contains a resistor to provide current limiting in the alarm state.
WB-1AP Detector Base
For high humidity environments (which may cause nuisance alarms), System Sensor has this molded plastic enclosure kit for detector adapter bases in order to minimise condensation effects.