2251CPI Detector
The 2251CPI C Series smoke detector in an improved version of the 2251BPI intelligent addressable photoelectric model, featuring a smoke sensing chamber which diminishes nuisance alarms.
2351PTIRAUS Detector
This is a multi-criteria combination heat and smoke detector, with a supplementary infra-red (IR) sensor for Pertronic intelligent addressable fire alarm systems.
2251CTLE-34-IV Detector
This 200 Series intelligent plug-in COPTIR fire sensor combines CO fire monitoring, IR for measuring ambient light levels and flame signatures, optical smoke and heat detection.
5251CPI Detector
As C series intelligent addressable heat detectors continually reporting to the fire panel, they have a fixed temperature alarm threshold (5251CPI or rate-of-rise alarm (5251RCPI).
5251RCPI Detector
This rate-of-rise (ROR) detector is pre-configured, continually reports temperature measurement to the fire panel, and sends an alarm signal if it rapidly increases.
5251B-WP Detector
The 5251B-WP is a fixed temperature heat sensor with configurable thresholds, and as a weatherproof unit provides open area protection in areas subject to moisture.
5251RB-WP Detector
Model 5251RB-WP is a weatherproof rate-of-rise temperature heat sensor with configurable thresholds
7251CPI Detector
The 7251CPI smoke detector is a highly sensitive intelligent addressable photoelectric sensor, to protect valuable assets and operational systems which must remain functioning at all times.
2251BPI Detector
The Analogue Addressable Smoke Detector (2215BPI) is a plug-in photoelectric unit, where sensor chamber smoke levels are continuously monitored and reported to the fire panel.
22051TLE Detector
This analogue addressable PTIR (Photoelectric, Thermal, Infra Red) Multi-Criteria smoke detector combines three sensing elements in one unit.
5251RBPI Detector
The 5251RBPI point-type rate of rise heat detector automatically initiates an alarm condition for a pre-configured rapid temperature increase.
SPIB-LIOS Interface
The Pertronic Modbus Interface allows fibre-optic Linear Heat Detection (LHD) systems to be integrated into a Pertronic F220 fire system, and can be mounted in the panel or at a remote location.
SPIB-PWF8000 Interface
The Pertronic SPIB-PWF8000 connects a Protectowire Fibre System 8000 with a Pertronic F220 fire system using the panel's loop emulation capability.
B524IEFT-1 Detector Base
This is a detector base designed for use with System Sensor analogue addressable detectors. It prevents an entire communications loop from being disabled when a short-circuit occurs.
B501AUS Detector Base
The B501AUS detector base is a plug-in base for analogue addressable point detectors for AA loop (+ and -) and remote indicator connections.
B501AP Detector Base
Plug-in base for AA detectors and loop devices; deeper than the standard B501AUS. Suitable for VAD and WST series strobes, WSS-sounder strobes, BSO-sounders, and BSS-sounder strobes.
CP500 Programmer
A handheld programmer to read and set the address for System Sensor analogue addressable detectors, modules, callpoints and Spectralert horns/strobes.
BCK-200B Detector Kit
The Coloured Detector Cover Kit allows System Sensor detectors and bases to be changed to match the decor. The kits are available in black or white.
WB-1AP Detector Base
For high humidity environments (which may cause nuisance alarms), System Sensor has this molded plastic enclosure kit for detector adapter bases in order to minimise condensation effects.